16
POWER SOCKETS/MAIN SWITCH/MOVING MODULES AUTOMATICALLY
GENERAL GUIDELINE
For safety reasons there must always be a space of around 4
cm between the modules and to the bathroom and kitchen.
CONTROL PANEL
On the front side of each module is a control panel. In
standby mode, only the MOVEment logo is illuminated. The
control panel has a proximity sensor that activates the but-
ton lighting.
MOVING MODULES AUTOMATICALLY
SOCKETS IN THE MODULES
MAIN SWITCH MOVEMENT DRIVE SYSTEM
The 230V power sockets in the bed module
and the office module (the office module is
only part of the Senior module) are fused for
up to 13 amps. Equipment plugged into them
must not exceed this total load.
The main switch for the MOVEment drive sys-
tem is located next to the apartment door. In
position “O”, the MOVEment drive and mon-
itoring system is cut off from the power. The
power sockets in the modules, however, con-
tinue to be supplied with electricity.
Содержание JULI140
