24
QUARTZ CHRONOGRAPH
1/10 OF A SECOND – TYPE D
Includes Movado BOLD 38 mm mid-size and Verto quartz chronographs
LEGEND:
H
– Hour hand
M
– Minute hand
C
– Chronograph seconds hand
E
– Chronograph 30-minutes counter
G
– Chronograph tenths-of-a-second counter
S
– Small seconds hand
D
– Date window
1
,
2
,
3
– Crown positions
A
– Chronograph push-button (start/stop)
B
– Chronograph push-button (split-time/reset)
This quartz chronograph model features a tenths-of-
a-second counter, minute counter (up to 30), and
small seconds subdials; center-mounted chronograph
seconds hand; and date window. It can be used to
time an event up to 30 minutes and 60 seconds in
duration to the nearest 1/10 of a second.
TIME/DATE SETTING
To set the time:
1. Pull crown out to position 3; watch stops.
2. Turn crown in either direction until hands indicate
desired time – check that the date changes at
midnight, not at noon.
NOTE: Date
D
will advance by one each time hour
hand
H
by two completes two clockwise revolutions,
passing midnight.
3. Push crown back in to position 1; watch restarts.
To adjust the date rapidly using crown:
1. Pull crown out to position 2; watch stops.
2. Turn crown counterclockwise to advance date.
3. When correct date is displayed in window
D
, push
crown back in to position 1; watch restarts.
CHRONOGRAPH FUNCTIONS
Overview
Use buttons
A
and
B
to operate the chronograph.
Pressing button
A
the first time will start the chronograph.
While the chronograph is running, once the chronograph
seconds counter hand
C
has completed one turn, minute-
counter hand
E
will jump ahead one minute. Tenths-of-a-
second hand
G
does not move when the chronograph
is running. Pressing button
A
a second time will stop the
chronograph and move hand
G
to the relevant tenth-of-
a-second mark. Pressing button
B
will reset hands
G
,
E
and
C
to zero. Adjusting the time does not stop the
chronograph, but it does block buttons
A
and
B
for as
long as the crown is pulled out.
IMPORTANT: Crown must be in position 1 and hands
must be at zero before chronograph is started. Press
button
B
to reset hands to zero. DO NOT push button
A
or
B
while crown is pulled to position 2 or 3. If button
A
or
B
is accidentally activated while crown is not flush
against case, one or more of the chronograph hands
will become de-synchronized. Should this occur, follow
instructions below.
Synchronization of chronograph hands:
After changing the battery, or in the event of an error,
the chronograph hands can be realigned to zero if
needed. A single push (quick press and release) will
FIGURE A
