14
MC12 manual
APPENDIX A: MC12-Micro Technical Specifications
Controls:
Speed:
Manual setting from 0,1 to 200 RPM max, in increments of 0.1 RPM.
Time:
Manual settings from 0,1 to 999,9 sec in increments of 0,1 sec.
Monitoring/System Information/External communication
Man/Machine interface:
4-piece 7 segments LED at front display.
External Communication: None.
Alarm:
LED Indi Internal beeper.
Specifications/Standards & Directives/ Technical data:
Power supply: Operating power from 80 VAC to 260 VAC, 50 and 60 Hz.
by integrated automatic voltage selector.
Power consumption:
80 Watt maximum.
Stepper motor:
(1,8degr/step) max 2 Amp at 40 Volt.
Operating Temperature:
-20 to +70 degrees Celsius.
Input signal(s):
Injection molding:
Start/Stop trigger input, potential free or 18-
24VDC*.
Extrusion:
Start/Stop
trigger input, potential free or 18-24VDC*.
* Note potential contact
Guaranteed OFF: 0-8VDC.
Guaranteed ON: 18-30VDC.
Output(s):
Stepper motor
max. output 2A (40VDC).
Standard Directives:
Protection class: IP-50.
Safety
•
In case of overload due to short-circuit or in correct connection, the power supply automatically shuts
down;
•
Opto-insulated start input for connection to production machine.
Machine connection flange:
Standard flange NST40 neckpiece with cleaning opening (steel epoxy coated);
Inlet:
ø50mm;
Outlet: ø45mm.
Standard flange NST90 neckpiece with cleaning opening (steel epoxy coated);
Inlet:
Ø50mm;
Outlet
Ø90mm.
Optional parts
•
12 liter hopper stainless steel;
•
Water-cooled flange BH(A) inlet/outlet 50mm/50mm stainless steel ANSI 304;
•
Water-cooled flange PHA inlet/outlet 100mm/100mm.
