BF-Series (Mini Electric Screwdrivers BF035 & BF045) Operation Instructions
Corporate Headquarters:
1080 North 11th Street, San Jose, CA 95112 Phone: (408) 292-2214 Fax: (408) 292-2733
www.mountztorque.com
Page 5
Features
- Over Heat Protection (OHP) and Over Current Protection (OCP) protect
driver from damage or malfunction.
- Temperature Detection powers down the unit and resets automatically when
unit restores to acceptable levels.
- Switchable 110V & 230V input voltage. Unit will reset itself if motor/current
overload is too high.
- Start & Stop Signal Output (for PLC).
- Screwdriver Lock Signal Input (for PLC).
- Unit can be connected to the Scout (Screw Counter).
Model: STC40
Item # 145754
Specifications:
Rated Output: 2.6A 105W
Max. Output: 10A
Output VDC: 30/40V
Input VAC: 110/230V
Size inches (W x D x H): 4 3/8” x 7 1/2” x 2 3/8”
Weight: 1.8 lbs.
Operates with: BF-Series and NF-Series
STC40 transformer is power supply designed for operating the BF-Series & NF-
Series brushless electric screwdrivers. Only use this transformer when operating
any BF-Series & NF-Series models.
STC40 Transformer
FT-30D Mini Transformer
The FT-30D Mini Transformer is power supply designed for operating
only the Mini BF-Series brushless electric screwdrivers.
Features
- Over Heat Protection (OHP) and Over Current
Protection (OCP) protect driver from damage or malfunction.
- Temperature Detection powers down the unit and resets
automatically when unit restores to acceptable levels.
- Switching power supply 110V - 230V input voltage. Unit will
reset itself if motor/current overload is too high.
- Unit can be connected to the Scout (Screw Counter).
Model: FT-30D
Item # 145870
Specifications:
Rated Output: 1.2A
Output VDC: 30V
Input VAC: 110 ~ 230V
Size inches (W x D x H): 2 3/4” x 5 1/8” x 1 1/2”
Weight: 8.8 oz.
Operates only: BF035 & BF045
Program Lock Key -
Item # 145774
The Program Lock Key protects from incidental or operator tampering of the
programmable settings on the side of select BF-Series models* (V3 models only).
To adjust the settings the Program Lock Key must be is plugged into the STC40 or
FT-30D Mini Transformer.
* Note! The Program Key is required for the BF-Series Mini models, Standard
Models and Soft Stop Models. RPM & Soft Start Settings cannot be adjusted
without it.
The Program Key
cannot
be used with BF-Series Standard Plus Models, Soft Stop Plus Models & Angle & Auto Reverse
Models.
