36
OPERATION
Personal protective equipment
•
Wear protective gloves.
•
Wear protective goggles. Flying shavings can cause injury.
•
Wear hearing protection for protection from continuous noise in the work place.
•
Wear dust mask for protection from airborne dust.
Warning! Risk of injury! Insert or remove the battery only when the power tool is
powered off. Pay attention when working that the air vents are not covered up or
congested.
•
The power tool should not be damp during use or used in humid environments.
•
Keep the power tool handle dry without oil and grease.
•
Ensure that there is no water or electrical installation behind the drilling surface.
Direction of rotation R/L and unlocking/locking
The machine is able of running in both right and left direction. Sense of rotation can be changed using
the rotation direction switch (3) located above the main switch (8). Always wait until the machine stops
before changing the rotation direction. The machine is equipped with electric brake so the stopping
happens fast. For locking the power tool out, leave the rotation direction switch (3) in the middle
position – this will disable the main switch (8).
•
Right run: for screwing in.
•
Left run: for unscrewing.
