Mountfield NTL 430 TR-R Li 48 Series, Руководство оператора

Страница: 29 / 43

EN - 4
3.1.2 Improper use
Any other usage not in keeping with the above-mentioned
ones may be hazardous and harm persons and/or damage
things. Examples of improper use may include, but are not
limited to:
– allowing children, animals or other passengers to
ride on the machine as they could fall off and injure
themselves or compromise safe driving by the
operator;
– letting oneself be transported by the machine;
– using the machine to tow or push loads;
– using the cutting means on surfaces other than grass;
– using of the machine for leaf or debris collection;
– using the machine to trim hedges, or for cutting
vegetation other than grass;
– use of the machine by more than one person;
IMPORTANT Improper use of the machine will invalidate
the warranty, relieve the Manufacturer from all liability, and
the user will consequently be liable for all and any damage
or injury to himself or others.
3.1.3 User types
This machine is intended for use by consumers, i.e. non-
professional operators. The machine is intended for "DIY"
use only.
IMPORTANT The machine must be used by one
operator.
3.2 SAFETY SIGNS
The machine has various symbols on it (fig. 2). They are
used to remind the operator of the behaviour to follow to use
it with the necessary attention and caution.
Meaning of symbols:
Warning : Read the instructions be -
fore operating the machine.
Danger! Risk of thrown objects :
Keep all persons away from the work
area whilst working.
Only for lawnmowers with petrol
engines
Only for electric lawnmowers powered
by mains supply.
Only for electric lawnmowers powered
by mains supply.
Be careful when using the sharp
cutting means: Do not put hands or
feet near or under the opening of the
cutting means. The cutting means
continues to turn even after the motor
has been switched off. Remove the
safety key (deactivation device) be-
fore carrying out any maintenance.
IMPORTANT Any damaged or illegible decals must be
replaced. Order replacement decals from an authorised
assistance centre.
3.3 IDENTIFICATION LABEL
The identification label holds the following data (fig. 1).
1. Sound power level
2. CE conformity marking
3. Year of manufacture
4. Type of machine
5. Serial number
6. Name and address of Manufacturer
7. Article code
8. Max. motor operation speed
9. Weight in kg
10. Power voltage and frequency
11. Electrical protection rating
12. Nominal power
Write the identification data of the machine in the specific
space on the label on the back of the cover page.
IMPORTANT Quote the information on the product
identification label whenever you contact an authorised
service workshop.
IMPORTANT The example of the Declaration of
Conformity is provided on the last pages of the manual.
3.4 MAIN COMPONENTS
The machine is composed of a series of main components
that have the following functions (fig.1):
A. Chassis: this is the casing that houses the rotating
cutting means.
B. Motor: the driving force for the cutting means and
wheel drive (if provided);
C. Cutting means : the element designed to cut the
grass.
D. Rear discharge guard: it is a safety device which
prevents objects drawn up by the blade from being
hurled away from the machine.
E. Grass catcher: as well as collecting the grass
cuttings, this is also a safety element that stops any
objects drawn up by the cutting means from being
hurled away from the machine.
F. Handle: this is the operator’s work station. It is long
enough to ensure the operator remains at a safe
distance from the rotating cutting means whilst
working.
G. Battery (if it is not supplied with the machine, see
chapter 15 “accessories on request”) : provides the
energy for starting the motor. Its specifications and
regulations for use are described in a specific manual .