Mountfield NTL 430 TR-R Li 48 Series, Руководство оператора

Страница: 26 / 43

EN - 1
WARNING!: READ THOROUGHLY THE INSTRUCTION BOOKLET
BEFORE USING THE MACHINE. Keep for future reference
EN
INDEX
1. GENERAL INFORMATION .......................................... 1
2. SAFETY REGULATIONS ............................................. 1
3. GETTING TO KNOW THE MACHINE .......................... 3
3.1 Description of the machine and planned use ..... 3
3.2 Safety signs ......................................................... 4
3.3 Identification label .............................................. 4
3.4 Main components ................................................ 4
4. ASSEMBLY ................................................................... 5
4.1 Assembly components ....................................... 5
4.2 Handle assembly ................................................ 5
4.3 Grass-catcher assembly ..................................... 5
5. CONTROLS .................................................................. 5
5.1 Safety key (Deactivation device) ........................ 5
5.2 HANDLE .............................................................. 5
5.3 Cutting height adjustment ................................... 6
6. USING THE MACHINE ................................................. 6
6.1 Preliminary procedures ....................................... 6
6.2 Safety checks ...................................................... 6
6.3 Start-up ............................................................... 6
6.4 Working ............................................................... 7
6.5 StopPING THE MACHINE .................................. 7
6.6 After operation ..................................................... 7
7. MAINTENANCE............................................................ 7
7.1 General information ............................................ 7
7.2 Battery ................................................................. 8
7.3 Cleaning .............................................................. 8
7.4 Nuts and bolts ..................................................... 8
7.5 Cleaning the air filter ........................................... 9
7.6 Cutting means ..................................................... 9
8. STORING ...................................................................... 9
8.1 Storing the machine ............................................ 9
8.2 Storing the battery ............................................... 9
9. HANDLING AND TRANSPORTATION ........................ 9
10. ASSISTANCE AND REPAIRS ...................................... 9
11. WARRANTY COVERAGE .......................................... 10
12. MAINTENANCE TABLE ............................................. 10
13. PROBLEM IDENTIFICATION .....................................11
14. ACCESSORIES ON REQUEST ................................. 12
14.1 Batteries ............................................................ 12
14.2 Battery charger ................................................. 12
1. GENERAL INFORMATION
1.1 HOW TO READ THE MANUAL
Some paragraphs in the manual contain important
information regarding safety and operation and are
emphasized in this manner:
NOTE or IMPORTANT these give details or further
information on what has already been said, and aim to
prevent damage to the machine.
The symbol highlights danger. Non-compliance with
the warning could lead to personal and/or third party injury
and or damage.
The paragraphs highlighted in a square with grey spots
indicate the optional characteristics not on all models
documented in this manual. Check if the characteristic
is on this model.
Whenever reference is made to a position on the machine
"front", "back", "left" or "right" hand side, this refers to the
operator's working position.
1.2 REFERENCES
1.2.1 Figures
The figures in these instructions for use are numbered 1,
2, 3, etc.
Components shown in the figures are marked A, B, C, etc.
A reference to component C in figure 2 is written: "See fig.
2.C" or simply "(Fig. 2.C)".
The figures are given as a guide only. The actual parts may
vary from those shown.
1.2.2 Titles
The manual is divided into chapters and paragraphs. The
title of paragraph "2.1 Training" is a sub-title of "2. Safety
regulations". References to titles or paragraphs are marked
with the abbreviation chap. or par. and the relevant number.
Example: "chap. 2" or "par. 2.1"
2. SAFETY REGULATIONS
2.1 TRAINING
Become acquainted with the controls and the
proper use of the machine. Learn how to stop the
motor quickly. Failure to follow the warnings and
instructions may result in fire and/or serious injury.