16
5.3 DIRECTIONS BEFORE STARTING WORK
Before starting to mow, it is necessary to carry out several
checks and operations to ensure you can work efficiently and
in maximum safety.
5.3.1 Seat adjustment
To change the seat position, loosen the four fixing bolts (1) and
slide it along the slots.
Once you have found the right position, tighten the four
screws (1).
5.3.2 Tyre pressure
Having the right tyre pressure is the main condition for ensur-
ing that the cutting deck is horizontal and mows evenly.
Unscrew the valve caps and connect a compressed air line
with a gauge to the valves and adjust the pressure to the indi-
cated values.
5.3.3 Filling with oil and fuel
The engine manual indicates what type
of oil and fuel you can use.
With the engine off,
check the oil level.
According to the
instructions in the
engine manual, this
must be between the
MIN and MAX marks
on the dipstick.
NOTE
EN
1
1
1,0 bar
1,2 bar
(15 x 5,00-6)
1,5 bar
(13 x 5,00-6)
MAX
MIN