14
neutral position «N», and reverse
«R».
To go from one speed to another,
press the pedal (4.21) halfway and
shift the lever as shown on the
label.
Only shift into reverse when the
machine has stopped moving.
4.31 BRAKE PEDAL
This pedal works the brake on the
rear wheels.
4.32 DRIVE PEDAL
This pedal engages drive in the
wheels and controls the machine's
forward and reverse speeds.
– To engage forward drive, press it
towards «F» with your toe-cap.
As you increase the pressure on
Hydrostatic transmission:
WARNING!
the pedal, the speed of the machine increases.
– Reverse is engaged by pressing the pedal with the heel
towards «R».
– The pedal automatically goes into neutral «N» when
released.
Only shift into reverse when the
machine has stopped moving.
If the drive pedal is used, whether
forwards or for reverse, the engine stops as soon as the
parking brake (4.4) is engaged.
4.33 HYDROSTATIC TRANSMISSION DISENGAGEMENT
LEVER
This lever has two positions:
«A» = Transmission
engaged: for all uses,
when moving and during
cutting;
«B» = Transmission dis-
engaged: this makes it
much easier to move the
machine by hand, with the engine turned off.
To avoid damage to the transmission
unit, this operation must be carried out only when the
engine has stopped with the pedal (4.32) on position «N».
IMPORTANT
NOTE
WARNING!
EN
4.22
5
R
2
3
4
N
1
4.31
4.32
R
N
F
4.33
A
B