DO:
Use recommended batteries:
-
Moultrie Alkaline
-
Energizer Alkaline
-
Energizer Lithium
DON'T:
-
Use rechargeable batteries.
-
Mix old and new batteries, or
different brands.
A D D C A M E R A T O A C C O U N T
•
Download the Moultrie Mobile app, and log in or sign up for an account.
•
For existing accounts, go to
DEVICES > ACTIVATE
.
•
Scan the QR code on the camera (located inside control panel door).
•
Select a monthly or annual plan.
1
2
Scan the QR code
to watch a video of the camera overview and
step-by-step instructions for camera setup.
4 . C A M E R A S E T U P
S E E H O W I T ’ S D O N E
Need help?
Call Customer Success: 1-844-908-1219
I N S TA L L B AT T E R I E S
•
Press
EJECT
to release battery tray.
•
Fill tray with either 8 or 16 AA batteries.
(Minimum of 8 required)
•
If only using 8 batteries,
completely fill one side.
•
CAUTION:
Battery tray should insert easily when oriented and
aligned properly. Forcing tray into camera can cause damage.
3
4
2
T E S T YO U R C A M E R A
•
Once camera has gone back into sleep mode (LEDs off), press the
CONNECT
button to trigger a test photo.
•
In the Moultrie Mobile app, go to
GALLERY
, then pull down to refresh
and see your photo.
3
4
T U R N O N YO U R C A M E R A
•
Slide the power switch to
ON.
All LEDs will light up and then camera
will begin connecting.
•
Camera activation and connection should take 5 minutes or less. If a firmware
update is available after connection, LEDs will flash and the camera will power
itself off and back on.
•
If not connected, you may need to move your camera to a stronger signal area.
•
All lights will turn off once the camera is on and connection attempt is complete.
C O N N E C T I N G
Flashes yellow
as the camera
connects.
C O N N E C T E D
Turns green
upon successful
connection.
N O T C O N N E C T E D
Turns red if
connection is
not found.
7
