133
134
EN
EN
133
134
EN
EN
Must the Bluetooth on my phone by constantly activated?
Bluetooth must be activated in order to synchronise the app with i-Companion xl.
Must the Bluetooth on my phone by constantly activated?
Bluetooth must be activated in order to synchronise the app with i-Companion xl.
USE IN UNCONNECTED MODE
Pastries (list of sub-programs)
Soups (list of sub-programs)
Stews (list of sub-programs)
Steamed dishes (list of sub-
programs)
USING THE CONTROL PANEL (B)
Selecting an automatic program:
Powering up your appliance
Your appliance has an on/off switch marked 0/1. Switch it to 1.
The LCD screen will display all the settings as ‘0’.
(See Fig. 9)
.
In unconnected mode, the i-Companion xl LCD screen is white.
AUTOMATIC PROGRAM MODE
1- Press the program you wish
to use
(B4)
. A bright dot will
appear above the program you
have selected. Each time you
press again, the various sub-
programs will be shown, one
after the other.
2- The pre-programed settings
can be modified for the time
of a recipe (depending on the
chosen recipe, ingredients and
quantities prepared). Press the
cooking temperature selector
(B2)
or the time selector
(B3)
: the chosen setting will
flash on the screen
(C6-C7)
.
3- Adjust the setting(s) using
the +/- selector
(B6)
.
4- When you have finished
modifying all your settings,
press the “start” button
(B5)
to start the program. When
your appliance is using cooking
mode, the red indicator light
(B3)
lights up to inform you
that cooking has started.
5- When the program has ended, the appliance
sounds 3 beeps.
6- At the end of the soups, P2 and P3 slow cook
and steam cooking programs, the appliance
will automatically switch to keep-warm mode
for 45 minutes to keep your meal hot until it
is ready to serve. On slow cook programs P2
and P3 and in manual mode, the appliance’s
motor operates at a specific speed, to keep
the food in good condition and prevent it
from sticking to the bottom of the bowl. To
stop the keep-warm mode, just press the ‘stop’
button
(B5)
. The keep-warm mode will stop
automatically if you open the lid, press the
triggers
(D2)
or remove the bowl.
Some recipes may cause unexpected overflow due to the formation of bubbles, particularly when
using frozen vegetables. In this case, you should reduce the volumes accordingly.
DISCOVER THE AUTOMATIC PROGRAMS AVAILABLE:
Soup P1
Soup P2
Stew P1
Stew P2
Stew P3
Automatic
programs
«Default»
speed
(adjustable)
10 pulses and
S12 for 2 min
S7 to S10 for
30 s
Speed 3
Speed 1
Speed 2
«Default»
temperature
(adjustable)
100°C
(90°C
to 100°C)
100°C
(90°C
to 100°C)
130°C
(non-
adjustable)
95°C
(80°C
to 100°C)
95°C
(80°C
to 100°C)
Time
speed
(adjustable)
40 min
(20min
to 60 min)
45 min
(20 min
to 60 min)
5 min
(2 min
to 15 min)
45 min
(10 min
to 2hr)
20 min
(10 min
to 2hr)
Keep warm ‘default
function’ at the end
of the program
45 min
45 min
45 min
45 min
Motor speed at
keep-warm level
5s ON
at Speed 3
/ 20s OFF
10s ON
at Speed 3
/ 10s OFF
At the end of kneading in the pastry programs
P1
and
P2
, the appliance changes to “dough
rising” mode at 30°C for 40 minutes for your
dough to prove. If you open the lid, press the
locks
(D2)
or remove the bowl, the appliance
changes to pause mode and you have the
possibility of restarting it by pressing “start”
again.
If you wish to stop this mode, press and hold
the “stop” button for 2 seconds.
7- Press the locks
(D2)
and then remove the
bowl assembly
(D) (See Fig. 12)
.
In connected mode, after the automatic program
has started, you can stop the appliance at any
time by pressing the ‘stop’ button. The automatic
program is then in pause mode, you have the
possibility of restarting by pressing the “start”
button again. If you have chosen the wrong
program and if you want to cancel it, press and
hold the “stop” button for 2 seconds.