IX34208a_e.doc / Aug-09
Page 12 / 40
4.
Setup Procedure
For better understanding the following sections 4.1 and 4.2 explain settings for the display only.
Settings for Preselections and Serial Link will be explained separately, later.
4.1. Basic Parameters
The subsequent settings are of unique nature and must only be made upon the very first setup.
The basic setup selects the desired operation mode of the unit, the input characteristics
PNP/NPN and the desired brightness of the LED display.
Menu
Setting Range
Default
SSI-Mode
Setting of Master Mode or Slave Mode
For details see section 5.1
SSI-Bits
Bit length of the SSI string
For details see section 5.2
For word lengths other than 13, 21 or 25 select the
next higher setting
(e.g. set 21 bits with use of a 16 bit encoder)
SSI-Format:
Setting of the SSI code (Binary or Gray)
SSI-Baud Rate
0.1 ... 1000.9
kHz
100.0
kHz
SSI Test
SSI Self test functions (see 5.5.)
0 ... 8
00
Characteristics
Switching characteristics of the Reset input
NPN: switch to "-"
PNP: switch to "+"
Brightness
100%
Brightness of the 7-segment LED display
20%, 40%, 60%
80% and 100%
