FM26001c_e.doc / Nov-11
Page 12 / 27
5.3. General Setup Procedure
To change over from normal operation to the setup state, please keep down the PROG key for at
least 2 seconds. After this the menu appears and you can select one of the menu groups.
Inside each group you can select the desired parameter and edit the setting according to need. After
this you are free to edit more parameters, or to return to normal operation.
The function of the different keys during setup is shown in the table below.
Key
Menu Level
Parameter Level
Setting Level
PROG
Save settings and return
to normal operation
Return to Menu Level
Check entry, store result, then
go back to Parameter Level
UP
Switch over to next menu
Select next parameter
Increment the highlighted digit
or scroll the setting upwards
DOWN
Go back to previous menu
Select previous parameter
Decrement the highlighted
digit or scroll the setting
downwards
ENTER
Switch over to the
Parameter Level of the
current menu
Switch over to
Setting Level
Shifts the highlighted digit one
position to the left, or from
utmost left to utmost right
5.4. Changing Parameters on the Setting Level
With signed parameters, the front digit can only be changed between „+“ (positive) and „-„
(negative). The subsequent example explains how to change a parameter from originally 1024 to a
new value of 250 000.
The example assumes that you are already on the Setting Level, i.e. you have already selected the
corresponding parameter and read its actual value on the display. Highlighted (blinking) digits are
marked by background color and indicate the cursor position.
