AX34209a_e.doc / Mrz-16
Page 13 / 38
5.
The Parameter Menu
The menu provides one section with “basic parameters” and another section with “operational
parameters”. On the display you will only find those parameters which have been enabled by
the basic settings. E.g. when the Linearization Functions have been disabled in the basic set-up,
the associated linearization parameters will also not appear in the parameter menu.
All parameters, as good as possible, are designated by text fragments. Even though the
possibilities of forming texts are very limited with a 7-segment display, this method has proved
to be most suitable for simplification of the programming procedure.
The subsequent table is to show the general structure of the whole menu only.
Detailed descriptions of all parameters will follow in section 6.
5.1.
Overview of Basic Parameters:
General:
Mode of operation
Brightness of the display
Update time of the display
Access code
Mode of linearization
Definition of command key function
Preselections:
Signal source of relay 1
Switching characteristics of relay 1
Signal source of relay 2
Switching characteristics of relay 2
Hysteresis of relay 1
Hysteresis of relay 2
Communication:
Serial unit number
Serial communication format
Serial baud rate
