Step 5
(A.) Install ZeroWobble Hitch Mount (m3 & Sport)
Do NOT put a washer on the head of the bolt - the washer goes on the nut end. Insert the bolt into
the hitch pin hole and ensure the bolt head recesses into the hitch pin hole until it stops against the
MotoTote tube inside the hitch. This is critical to eliminating any shake by clamping the square tube
to the hitch. Then using an allen wrench and a socket wrench, tighten until the connection to the
hitch is solid with no play. Do not over-tighten.
NOTE: You will be able to lift the end of the square tube straight up. This is normal but there should
be no rotational movement.
Sport & m3 only: Insert the square plastic cap into the end of the square tube.
Install ZeroWobble Hitch Mount
Install ZeroWobble Hitch Mount (8/21/21)
10
(B.) Install Zer Hitch Mount (Max & Max+)
Put the washer on the HEAD of the bolt and insert it all the way into the hitch pin hole. Do NOT put
a washer on the threaded end of the bolt. Thread the Zer barrel nut with handle onto the
bolt (with no washer). Ensure the barrel nut recesses into the hitch pin hole until it stops against the
MotoTote tube inside the hitch. This is critical to eliminating any shake by clamping the square tube
to the hitch. Tighten until the connection to the hitch is solid with no play. Do not over-tighten.
NOTE: You will be able to lift the end of the square tube straight up. This is normal but there should
be no rotational movement.
