Step 2
(A.) Select Loading Side
The motorcycle can load and unload from either side of the vehicle, depending on which side you
mount the front of the wheelstop to. In this step, you only need to decide which side you prefer. We
recommend mounting the wheel stop to the drivers side as it enables the loading and unloading pro-
cedure to be completed safely off the passenger side of the vehicle. This is optimal when parked on
the side of a road but is completely up to you and your preference.
Attaching m3, Max or Max+ Components to MTX Platform
(B.) Mount Tire Track
Now, on the opposite side of where you selected to put the wheelstop, insert the rear tie down arm
into the slot and lay down the tire track on the platform. align with the two holes. Insert the two bolts
into the tire track and through the holes. Put on the nuts and washers then tighten snugly to minimize
rattling Do not overtighten. NOTE: The tracks look different but procedure is the same.
m3, Max or Max+ Components (8/21/21)
4
For Max or Max+ carriers
remove contents from the Max or Max+ components box.
For m3 carriers
remove all remaining parts (after step 1) from box.
For Sport carriers proceed to step 2 on page 6.
