VMX-synergy
™
-
IP 66
Remote Keypad User Guide
1 |
P a g e
Introduction
T
he
remote keypad (VMX-SGY-010
-N4
) can be used to control,
monitor and program up to 32 VMX-synergy™
soft starters.
The remote unit is powered from the host VMX-synergy™
and
requires only an Ethernet cable for communication.
Installation
T
he remote keypad can only be used with the standard ‘on-board’
Modbus RTU connection. It cannot be used with Anybus modules.
The remote touchscreen is a Modbus RTU master device. A PLC,
HMI, or other Modbus Master device cannot be used on the same
network while the remote touchscreen is connected.
Remote Keypad Setup VMX-SGY-010-N4
4.20" (112mm)
3.60" (91mm)
PEEL OFF
BACKING AND
DISCARD
ORIENTATION
LABEL
PEEL OFF
BACKING AND
DISCARD
CUT OUT
