Motortech ITB 100 Series, Руководство по сборке

Страница: 24 / 30

24 Rev. 06/2022
6.1 Unpacking
Unpack the device taking care not to damage it, and ensure that the assembly instructions are
always stored with the device and are easily accessible. Check the contents for completeness
and verify that the device type meets your application requirements.
Scope of Supply
The scope of supply of the device consists of the following components:
– Throttle including stepper motor
– Two O-rings, if necessary
– Assembly instructions
Required Accessories
– Connection cable for connection between the throttle and stepper motor driver
– VariStep stepper motor driver incl. configuration software MICT and USB interface cable
6.2
Mounting the Device
ITB types without groove
ITB types without groove can be used if the mounting flanges have a gasket.
Alternatively, a suitable gasket must be inserted between the ITB and the
connecting flange.
The installation location of the throttle body can be freely selected.
1. Insert the supplied O-rings into the corresponding groove on both sides of the throttle body
(see figure).
6 Assembly Instructions