31
English
PROGRAMMING
FE
ATURES
PROGRAMMING FEATURES
To easily program all the features in your radio,
it is recommended to use the CPS Kit which
includes the Programming Cable, CPS and
accessories sections.
Programming Mode
Programming Mode is special radio mode that
allows you to program basic radio's features by
using the radio’s panel programming.
When the radio is set to Programming Mode,
you are able to read and modify three features:
• Frequencies,
• Codes (CTCSS/DPL) and,
• Auto-scan.
The Programming Frequencies feature allows
you to select frequencies for each channel.
The Interference Eliminator Code (CTCSS/
DPL) helps minimize interference by providing
you with a choice of code combinations that
filter out static, noise, and unwanted
messages.
The Auto Scan feature allows you to set a
particular channel to automatically enable scan
each time you switch to that channel ( you will
not need to press any button to start scanning).
Learning To Read The Values The Radio
Signals You
As the non-display model does not have a
display to show the values that are being
programmed, the radio will communicate this
information using beeps and LED indications.
The radio's LEDs will blink two colors: 'orange'
to signal '0' and red for other values from '1' to
'9'. Short and long red blinks differentiate the
specific number the radio is showing you.
As the radio blinks the number, it will generate
a combination of short and long beeps.