background image

WS5100 Series Switch Installation Guide

6-2

Radio Frequency Interference Requirements - USA

This equipment has been tested and found to comply with the limits for a Class A digital 
device, pursuant to Part 15 of the FCC rules. These limits are designed to provide 
reasonable protection against harmful interference when the equipment is operated in a 
commercial environment.

This equipment generates, uses, and can radiate radio frequency energy and, if not 
installed and used in accordance with the instruction manual, may cause harmful 
interference to radio communications. Operation of this equipment in a residential area is 
likely to cause harmful interference in which case the user will be required to correct the 
interference at his own expense.

Radio Frequency Interference Requirements - Canada

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.

Marking and European Economic Area (EEA) 

Statement of Compliance

Motorola, Inc., hereby declares that this device is in compliance with all the applicable 
Directives, 89/336/EEC, 73/23/EEC. A Declaration of Conformity may be obtained from:

http://www2.symbol.com/doc/

CAUTION: 

This is a class A product. In a domestic environment this 

product may cause radio interference in which case the user may be 
required to take adequate measures.

!

Содержание WS5100 Series











































Отзывы: