Motorola WS5100 Series, Справочное руководство CLI

Страница: 463 / 492

Wireless Instance 20-45
Usage Guidelines
To stop a service, use the
no
command. For instance, use
no service wireless idle-radio-send-multicast enable
to stop sending
broadcast/multicast frames to idle radios
enhanced-probe-table
[enable | erase-report |
max-mu <0-512> |
preferred (add)
<MAC Address> |
window-time <10-60>] Configures an AP for detecting and locating MUs. The
switch maintains an enhanced-probe-table to track the
probes received by an AP.
• enable – Disables or enables the gathering of
information for MU locationing
• erase-report – Erases all MU Probe Table locationing
reports collected by the switch
• max-mu <0-512> – Configures the maximum number of
MUs that can be scanned for Probe Table information
• preferred <MAC Address> – Adds an entry to the
preferred MU list. This will list MU MAC addresses
• window-time <10-60> – Defines the time the probes are
assimilated. The probe with the highest signal strength
(dBm) is reported for a given AP MU pair
idle-radio-send-multicast
(enable) Enables the forwarding of multicast packets to radios
without associated MUs
legacy-load-balance Invokes a legacy load balance algorithm
radio-misc-cfg Used for radio specific miscellaneous configurations
rate-scale Enables wireless rate scaling (default).
request-ap-log <1-48> Requests an AP log for a selected AP index
save-ap-log Saves debug/error logs sent by the access-port
snmp-trap-throttle
<1-20> Limits the number of SNMP traps generated
• <1-20> – Sets the maximum number of traps (per second)
that can be generated
vlan-cache Services a switch’s VLAN cache