Motorola WS5100 Series, Справочное руководство CLI

Страница: 339 / 492

Standard ACL Instance 15-7
permit host A.B.C.D
Parameters
Usage Guidelines
Use this command to allow traffic based on the source IP address or network address. The
last ACE in the access list is an implicit deny statement.
Whenever the interface receives the packet, its content is checked against all the ACEs
in the ACL. It is allowed based on the ACL configuration.
Example
The example below permits all the traffic that comes to the interface:
WS5100(config-std-nacl)#permit any rule-precedence 50
WS5100(config-std-nacl)#
The example below permits traffic from the source network and provides a log message:
WS5100(config-std-nacl)#permit xxx.xxx.1.0/24 log rule-precedence
60
WS5100(config-std-nacl)#
A.B.C.D/M Defines the source IP address range to match
any Any source IP address.
• log – The log matches against this entry
• rule-precedence <1-500> – Defines the access-list
entry precedence
host Single host address.
• A.B.C.D – Defrines the exact source IP address to
match
NOTE: The log option is functional only for router ACLs. The log option
displays an informational logging message about the packet matching
the entry sent to the console.