Motorola WS5100 Series, Справочное руководство CLI

Страница: 457 / 492

Wireless Instance 20-39
Parameters
interference-avoidance Interference avoidance configuration.
enable Enables/disables interference avoidance
hold-time <0-65535> The number of seconds to disable interference avoidance
after a detection. This prevents a radio from changing
channels continuously. Set the hold-time between 0-65535
seconds
retries <0.0-15.0> Defines the average number retries to cause a radio to
re-run auto channel selection. Set between 0-15
neighbor-recovery Invokes neighbor recovery configuration commands
action
(both|none|open-rates|
raise-power)
radio (
<1-1000> |RADIO)
Defines the radio’s self healing action when neighbors are
detected as down
• both – Raises the power to max and open all rates
• none – No action taken
• open-rates – Opens all rates
• raise-power – Raises the power to maximum
• radio – Modifies the action for specified radio(s)
• <1-1000> – Sets a single radio index
• RADIO – Defines a list (1,3,7) or range (3-7) of radio
indices
enable Monitors access ports and attempts to increase coverage
on a detected failure
neighbors <1-1000>
(<1-1000>|RADIO)
Adds a radio as a neighbor
run-neighbor-detect Disassociates all mobile units, clears current neighbors and
runs neighbor detection