Configuration
Section 3
WR850
3-35
Step 2:
Under
Protocol
, select the protocol which applies to the communications to be
restricted.
Step 3:
Under
Destination Port Range
, enter the port(s) to be restricted.
Step 4:
Under
From Day
and
To Day
, select the first day the restrictions should be in
place, and then the first day the restrictions should no longer be in place.
Step 5:
Under
From Hour
and
To Hour
, select the start and stop times of the restrictions
that will be in place.
Step 6:
At the end of each line, check the
Enabled
box to engage the filters.
Step 7:
At the bottom of the page, click the
Apply
action button.
