Motorola V.3600, Руководство пользователя

Страница: 138 / 271

Fax Operation
9-8 V.3600
The V.3600 returns an ERROR result code if any of the above
commands are issued while the modem is on hook.
Facsimile Transmit — +FTM=(Mod)
+FTM=(Mod)
causes the modem to transmit data using the modulation
and speed selected with the
(Mod)
parameter. For V.27 ter, V.29, and
V.17 modulations, the modem first transmits the required training
sequence (with echo protector tone). After it is appropriately configured
for transmission, the modem returns the
CONNECT result code and
transmits constant 1 bits until data is received from the DTE. For
additional information, consult the Class 1 specification.
Facsimile Receive — +FRM=(Mod)
+FRM=(Mod)
causes the modem to receive data using the modulation
and speed selected with the
(Mod)
parameter. If the selected carrier is
detected, a
CONNECT
result code is sent to the DTE; if a different
signal is detected, the modem sends a +FCERROR (CONNECT
ERROR)
result code and returns to command mode. This command is
aborted if the DTE sends any character to the modem other than DC1 or
DC3 during this mode. For additional information, consult the Class 1
specification.
24 V.27 ter 2400 bps
48 V.27 ter 4800 bps
72 V.29 7200 bps
73 V.17 7200 bps
74 V.17 7200 bps *
96 V.29 9600 bps
97 V.17 9600 bps
98 V.17 9600 bps *
121 V.17 12000 bps
122 V.17 12000 bps *
145 V.17 14400 bps
146 V.17 14400 bps*
Table 9-1. Values for Fax Modulation (Continued)
Value Modulation Speed
*
with short train