24
Using the Remote Control Unit
4. Using the Remote Control Unit
4.1
Powering On/Off the Remote Control Unit
To power on or off, press and hold the
POWER KEY
on
the
Remote
Control Unit.
4.2
Select a Pet Collar Unit (if you have more than 1 Pet
Collar Unit)
1.
Press the
OK
KEY
on the Remote Control Unit until the Pet Collar Unit
(
1
or
2
) to which you wish to send remote commands is displayed.
indicates that collar number
2
is selected.
4.3
Deliver Static Correction
1.
Press and hold the
STATIC CORRECTION KEY
on the Remote
Control Unit.
2.
Press
to increase the level of correction or press
to decrease.
The number corresponding to the current level of correction will appear
beside the
symbol on the screen.
indicates that the current level of correction is
15
.
3.
The Indicator LED on the Pet Collar Unit lights up in green.
4.4
Determine the TRAINING LEVEL for your Dog
TRAINING LEVEL is the level you use to discourage your dog from engaging in
a particular behavior.
With the Pet Collar Unit properly fitted on your dog and powered on, start on
level
1
. This level is extremely low and most dogs will feel very little, if anything
at all.
1.
Press and hold the
STATIC CORRECTION KEY
on the Remote
Control Unit.
2.
Look for signs that your dog is feeling the static correction, such as ears
twitching, looking up or down or a quick shake of the head.
3.
If nothing happens, press
to go to level
2
and try again.