manualshive.com logo in svg

Motorola SYMBOL MT2000 Series, Руководство пользователя

Поделиться
Скачать
Motorola SYMBOL MT2000 Series Скачать руководство пользователя страница 147

CHANGE/VIEW

MTSX RSS

6-20

68P81074C50

FUNCTION KEY DESCRIPTIONS:

F1 -  HELP provides useful information about the currently displayed menu, screen, or field.

F2 -  ADD CNV ITM (Add Conventional Item) allows you to add a conventional item.

F4 -  DELETE CNV ITM (Delete Conventional Item) allows you to delete a conventional item.

F7 -  ADD TRK ITM (Add Trunked Item) allows you to add a trunked item.

F9 -  DELETE TRK ITM (Delete Trunked Item) allows you to delete a trunked item.

F10 - EXIT moves the display backward in the RSS tree, one screen or menu at a time.

FIELD DEFINITIONS:

Conv Item
Press the up/down arrow keys to select Menu functions.

Use F2 to add, and F4 to delete conventional items.  Depending on your radio version and model number, you
will be able to choose from all or some of the functions listed below.

CHAN/SUB  

Select/Change Channels

BLANK

No Function. No tone will sound.

DIR

Enable/Disable (Talkaround) (1)

MSG

Enables the Message feature. [3]

MUTE 

Enable/Disable the keypad beeps

PAGE 

Select Call Alert ID. [3]

PHON

Select DTMF Phone Number to be transmitted (1)

PROG

Change Phone/Scan lists (1)

PSWD

Change Radio Lock Password (2)

PWR

Enable/Disable Tx Low Power

SCAN

Enable/Disable Channel Scan (1)

STS 

Enables the Status feature. [3]

VIEW

View Phone/Scan lists (1)

ZONE/SYS  

Select/Change zones

NOTES

[1] For radio to function properly, this feature must also be enabled on the

Conventional Personality screen (F4/F6/F3). 

[2] For radio to function properly, this feature must also be enabled on the Radio

Wide Display Options screen (F4/F6/F3). 

[3] For the radio to function properly, this feature must also be enabled on the

MDC System screen (F4/F6/F4/F3).

*

For PSWD to show on the RADIO WIDE MENU ITEM CONFIGURATION
screen, RADIO LOCK must be enabled on the RADIO WIDE DISPLAY
OPTIONS screen  (F4/F3/F6).

[4] The radio display shows 3 valid menu items per screen. When programmed

menu items are not applicable for a specific zone/channel combination, the
menu items will be discarded. 

WARNING

THE RADIO DISPLAY MUST CONTAIN AT LEAST 1 VALID, NON-
BLANK MENU ITEM. Failure to do so may result in improper behavior of
the radio.

Содержание SYMBOL MT2000 Series

















































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды