License
4
SURFboard
®
SBV4200 VoIP Cable Modem User Guide
X
Home
Exit
Introduction
Before You Begin
Installation & Configuration
FAQ
Troubleshooting
Glossary
Before You Begin
Before you begin the installation, check that you received the following items with your
SURFboard VoIP cable modem:
You will need 75-ohm
coaxial cable
with
F-type connectors
to connect your VoIP cable
modem to the nearest cable outlet. If a TV is connected to the cable outlet, you may
need a 5-900 MHz RF
splitter
and two additional coaxial cables to use both the TV and
the VoIP cable modem. The coaxial cable and RF splitter are available at consumer
electronic stores.
Item
Description
Power adapter
or cable
The SBV4200 is supplied with one of the following
powering options:
■
A power adapter to connect to the power outlet
■
A power cable to connect to an
UPS
10/100Base-T
Ethernet cable
Connects to the
Ethernet
port
USB cable
Connects to the
USB
port
SURFboard VoIP
Cable Modem
CD-ROM
Contains the User Guide and USB drivers
Caution
To comply with all national safety
regulations, do not route the USB,
Ethernet, or telephone cables
outside of the building.