64
Conventional Radio Features
Operation
The repeat/direct feature allows you to bypass the repeater and talk directly
to another portable radio. This is known as DIRECT operation. The transmit
frequency is the same as the receive frequency.
In REPEAT operation, you talk through the repeater, which increases the
radio’s operating range. The transmit frequency is not the same as the receive
frequency.
If the repeat/direct feature is slaved to a mode, that mode is programmed
to either one or the other type of operation (direct or repeat).
If the repeat/direct feature is programmed, through the RSS, to the two-
position (A/B) concentric switch, one position on the switch will select repeat
operation, and the other position will select direct operation.
Smart PTT is a per-mode feature which gives the system manager better
control of radio operators. When smart PTT is enabled in your radio, you will not
be able to transmit on an active mode. In addition, the monitor function is disabled
on modes programmed with smart PTT. Three radio-wide variations of smart PTT
are available:
Transmit Inhibit on Busy Mode with Carrier
—With this feature enabled, you
will be prevented from transmitting if any activity is detected on the mode.
Transmit Inhibit on Busy Mode with Wrong Squelch Code
—With this
feature enabled, you will be prevented from transmitting on an active mode
that has a squelch code other than your own. If the PL code is the same as
yours, the transmission will not be prevented.
Quick-Key Override
—This feature can work in conjunction with either of the
two above variations. With this feature enabled, you will be able to override
the transmit-inhibit state by quick-keying (two PTT presses within one second
of each other) the radio.
Smart PTT radio operation is exactly the same as standard radio operation,
except that, if you try to transmit (press the PTT) on a smart PTT mode, a
continuous alert tone will be generated until you release the PTT, and the
transmission will be inhibited.
The red LED will blink when the radio is receiving to indicate that the mode is
busy.
Содержание SABER SI
