background image

26

6880904Z68-O

May, 1997 

Battery Charger

P110 16-Channel Portable Radios

(3) The cord size is 18AWG for lengths of up to 100 feet, 
and 16AWG for lengths up to 150 feet.

• Do not operate charger with damaged cord or plug — 

replace them immediately.

• Do not operate charger if it has received a sharp blow, 

been dropped, or otherwise damaged in any way; take it 
to your local Motorola Radius technician.

• Do not disassemble charger; take it to your local Motorola 

Radius dealer when service or repair is required. Incorrect 
reassembly may result in risk of electric shock or fire.

• To reduce risk of electric shock, unplug charger from out-

let before attempting any maintenance or cleaning. Turn-
ing off controls will not reduce this risk.

To Operate Charger

1.

Insert the battery, with or without the radio, into the 
charger pocket. (Be sure that the radio is off).

2.

Insert plug into the charger and plug the transformer 
into the appropriate AC power outlet.

3.

When the battery is fully inserted, the LED glows red. 
The LED continues to glow red while the battery is 
charging.

Plug

Transformer

Содержание radius P110








































Отзывы: