Getting Started
Before you can use your telephone, you need to
activate your service and program your phone. In
addition, if you will be using a rechargeable
Battery Pak, it must be fully charged before you
make your first call.
Activating Your Phone Service
Your Cellular Service Provider will need to
activate or “turn on” your cellular phone service.
Depending on where you purchase your cellular
telephone, your phone may be activated by your
sales person or you may need to contact a
Cellular Service Provider.
You will be given your cellular phone number
when you activate your service.
Don’t worry!
If you make a mistake,
9
will appear. After a few seconds, your
phone will display the incorrect number you
entered for that step. Press
CLR
to erase the last
digit or press and hold
CLR
to erase the entire
entry. Re-enter the correct number, then press
ST0
and you’re finished!
Programming Your Phone
You
cellular telephone may be programmed by
your sales person or you may be asked to
program your phone. In either case, our
Simplified Programming makes this process easy!
l-2-3
Simple Programming
Before you start,
write down your cellular
phone number here
( ) -
and your Carrier System ID* (a one to five
digit number)
here
*Contact your Cellular Service Provider to confirm your
Carrier System ID
number.
6
Preparing a Rechargeable
Battery Pak for Initial Use
A rechargeable Battery Pak must be fully charged
before being used in your phone. Fully charging a
Battery Pak will give you the longest ta% and
standby times throughout the life of the
Battery Pak.
All rechargeable Battery Paks are shipped from
the factory in a discharged state in order to
extend their life. It
is recommended that you
charge a new rechargeable Battery Pak at
least 12 hours, with your phone powered off,
using the charger supplied with your phone.
Please see page 10 for Battery Pak installation
and removal instructions and page 12 for Battery
Pak charging instructions.
7