Unsuccessful Call Attempts
If you see or hear one of the following signals,
you have not successfully completed your call.
You may have
to place a call
before the green
ON/LOCK
indicator
was flashing to let you know your
phone was fully operative. Either
press
SND
again before ending the
unsuccessful call attempt to
automatically redial the call (refer
to Automatic Redialing below), or
press
END
and dial the call again.
busy
The
Called Party’s Line is Busy
ending the unsuccessful attempt. Ed
is
then displayed.
Your phone will make the call attempt
continuously over the next four minutes. When a
connection is made, the phone will ring once to
alert you so that you may lift the phone to your
ear and begin conversation. You do not have to
press SND to answer the call.
If four minutes is insufficient time, press
SND
to
begin another four minute cycle.
Receiving a Call
Your phone must be powered on to receive calls.
Regardless of ringer volume level, your display
will show CR
whenever you receive a call.
To answer a call, press
SND. The
green “IN
USE” indicator light will flash.
Volume Meter
Automatic Redialing
Your telephone includes a convenient feature
designed to make repetitive call attempts
automatically when a cellular system is busy.
If you receive an alternating high/low signal or
the fast busy tone when attempting to place a call
and wish to retry the call, press
SND
before
The Volume Meter represents the current volume
setting and is displayed whenever you adjust the
earpiece or the ringer/keypad volume. The
volume level is displayed as a bar graph following
the letter at the left side of the display. The
alone represents the lowest volume setting at
which tones/ringers will sound, with each
additional bar representing a higher volume
setting.
Low
Volume
Highest
Volume
20
21