Motorola PEBL U6, Руководство по обслуживанию

Страница: 19 / 78

6809493A67-O March 06, 2006 19
Level 1 and 2 Service Manual Tools and Test Equipment
Tools and Test Equipment
Table 1 lists tools and test equipment recommended for disassembly and reassembly
of U6 telephones. Use either the listed items or equivalents.
Table 1. General Test Equipment and Tools
Motorola Part Number
1
Description Application
RSX4043-A
Torque Driver Used to remove and replace screws.
--
#0 Cross Point Screwdriver
Used to remove cross point screws in
the flip assembly.
—
Torque Driver Bit T-6, Apex 440-6I Torx
or equivalent
Used with torque driver.
Torque Driver Bit T-3 Plus Used with torque driver
See Table 7
Rapid Charger
Used to charge battery and to power
phone.
U6 90 degree test fixture
AMS Part-Number 19700155
Used to test flip assembly open angle
0180386A82
Antistatic Mat Kit (includes 66-
80387A95 antistatic mat, 66-80334B36
ground cord, and 42-80385A59 wrist
band)
Provides protection from damage to
device caused by electrostatic
discharge (ESD).
6680388B67
Disassembly tool, plastic with flat and
pointed ends (manual opening tool) Used during assembly/disassembly of
phone.
6680388B01
Tweezers, Plastic
Used during assembly/disassembly of
phone.
—
Digital Multimeter, HP34401A
2
Used to measure battery voltage.
8102430Z04
GSM / DCS Test SIM Used to enable manual test mode.
1. To order in North America, contact Motorola Aftermarket and Accessories Division (AAD) at (800) 422-4210 or
FAX (800) 622-6210; Internationally, AAD can be reached by calling (847) 538-8023 or faxing (847) 576-3023.
2. Not available from Motorola. To order, contact Hewlett Packard at (800) 452-4844.
1 and 2
U6 GSM
6809493A67-O