4-24
Setup and Operation
PORT Menu
⎯
Setting Logical Non-Ethernet Input Ports
To set logical non-Ethernet input ports:
1
Select the
PORT
option on the MAIN menu.
2
Select a
logical non-Ethernet input port
(1 through 16) at the PORT ##: prompt.
3
Select
PIDTBL
and then press
ENT
.
If setting up an existing PID table, skip to step 5.
4
Select
ERASE
and
COMMIT
if setting up a new PID Table. This ensures that any previous
settings are cleared.
5
Select
CONFIG
and then press
ENT
to display the PIDTBL setup menu illustrated in
Figure 4-15.
6
Select a
PIDTBL entry
from 01 to 28.
7
Select the
PID-IN> number
(0000H to 1FFFH); for Entry number 2 through 28 only.
8
Select the
PID-OUT> number
(0000H to 1FFFH) for Entry number 2 through 28 only.
9
At the DST-PORT> prompt, select the first, second, and third
destination output ports
(00 through 16).
Entry 01 is for default PIDs not otherwise identified by the PID table.
Figure 4-15
PIDTBL setup menu
A
B
C
D
F
G
E
H
Table 4-12 describes the fields and available options:
Table 4-12
PID table setup menu options
Key Field
Options Description
A
PIDTBL
nn
01
through
28
Selects a port nomenclature.
B
PID-IN 0000H
through
1FFFH
Specifies the hexadecimal PID number to which this map applies.
Press
or
to move from digit to digit or change the digits. This is not
displayed on the menu for PID table entry number 01.
C
PID-OUT 0000H
through
1FFFH
Specifies the hexadecimal number to which the specified input PID is
re-assigned for output. Press
or
to move from digit to digit or change
digits. This is not displayed on the menu for PID table entry number 01.
OM 1000 Installation and Operation Manual
