Motorola MTP830 Скачать руководство пользователя страница 105

Страница: 105 / 108

Message

Message Description

No Selected Scan List

You selected an empty network list.

No Service

Your radio is out of coverage.

Not Allowed To Initiate Call

You are not allowed to dial a number which is not in the address
book.

Not Allowed To Transmit

Release the PTT button and try again later. You are not allowed to
send a text message or a status message to a number which is not in
the address book.

Single TalkGroup Only

There is only one programmed entry in the scrolling list.

Overheating, Please Turn Radio Off

Your radio turns off. Keep it turned off for 5 minutes.

Party Busy

Called radio is busy.

Party Not Available

Called radio is out-of-range or turned off. Please try again later.

Please Try Again

You could not call.

Please Wait Connecting

A message during startup.

Registration Failure

Your radio could not register within the system. Please try again later.

Repeater available

Your radio has connected to a repeater.

Repeater not available

Your radio cannot connect to a repeater, or connection has been lost.

Service Denied

Invalid number. Call your service provider.

Service Not Available

This service is not available on the current network.

Service Restricted

This service or feature is restricted by your service provider, it has
not been purchased, or it is not available.

TalkGrp

...

cannot be deleted

Your service provider set this group so you cannot delete it from the
favorite talkgroup folder.

Try Again Later

The requested service is temporarily unavailable.

Radio Disabled

Check with your service provider.

Unit is OK

Warn:

Self-test error. A minor fault has been detected. Your radio is still
fully operative. If this error recur, note the error code and contact
service.

Unit Not Attached

You radio could not attach to the system. The talkgroup may not be
defined in the system. Please try another group.

Troubleshooting |

105

| |

Send Feedback

Содержание MTP830












































































































Результаты поиска

Содержание MTP830

Отзывы:

Motorola MTP830, Руководство пользователя, Страница: 105 / 108

Результаты поиска

Содержание MTP830

Отзывы: