Motorola MTP8000Ex Series, Руководство пользователя по функциям

Страница: 70 / 176

NOTICE: It is possible to cancel making an emergency group call in TMO. To do this,
perform one of the following actions before the talk permit is granted (depending on your
service provider settings):
• Release the PTT button.
• Press the END key (default).
When the call is canceled, your radio displays Call Cancelled message (if configured by
your service provider).
3.5.4
Receiving Emergency Group Calls
The radio receives an Emergency Group Call from a selected pre-programmed group. An incoming call
is indicated by an appropriate tone, status icon, and red color of the display.
3.5.5
Non-Tactical Emergency
In Non-Tactical Emergency, the radio switches to a designated Emergency talkgroup when starting
Emergency Operations. This talkgroup is used for the complete duration of the Emergency Operations
(you cannot change the talkgroup).
In TMO, it is possible to configure the radio to make Emergency Non-Tactical Group Calls without
sending attachment. If this is set, the radio assumes implicit attachment after receiving a temporary
address.
In DMO, the Non-Tactical Emergency proceeds on the same frequency as the previously selected
talkgroup. The service provider can designate any ITSI address to be used for Emergency Operations,
(this can be an Open Group – broadcast address).
After exiting from Non-Tactical Emergency, the radio goes back to the previously selected talkgroup.
3.5.6
Emergency Individual Calls (Private or MS-ISDN)
The Emergency Individual Calls are Simplex or Duplex Calls with emergency priority. On pressing the
EMERGENCY button, the radio initiates an Individual Call to the provisioned address (private or MS-
ISDN). During this kind of call all user indications are unavailable and all other services are rejected.
Emergency Operation ends as soon as the Emergency Individual Call is ended.
3.5.7
Emergency SDS Status
Radio sends a status message with a preprogrammed value to the destination address set by your
service provider. Emergency SDS Status is available in TMO only. If no status acknowledgment or
negative acknowledgment is received, the radio retries sending the message. Status is not resent if
Emergency Alarm or Hot Microphone is configured.
3.5.8
Emergency Hot Microphone
The Hot Microphone allows you to talk without pressing the PTT button during Emergency Operations.
The transmission continues for a provisioned amount of time. Pressing the PTT button before the Hot
Microphone time expires ends the Hot Microphone operation. Then normal PTT operation in
Emergency group call takes over (that is, the transmission is ongoing for the time the PTT button is
held).
MN002041A01–AA
Chapter 3: Modes
70 Send Feedback