Motorola MTP8000Ex Series, Руководство пользователя по функциям

Страница: 78 / 176

• Packet Data (in TMO mode only, with Packet Data enabled on the network by the service provider)
The radio can be configured to give audio-visual notifications upon sending the Location Reports.
Depending on the radio settings, viewing the radio position and the status of the visible satellites is
available. The position may consist of longitude and latitude, UK, or Irish grid coordinates.
4.1
Enhancing GNSS Performance
Sometimes the GNSS feature is unable to complete a location calculation successfully. You hear an
audible tone indicating that your radio cannot see the satellites.
To maximize the ability of your radio to determine a location fix please note the following guidelines:
• Stay in the open — The GNSS feature works best where there is nothing between your radio and a
large amount of open sky. If possible, go outside, away from tall buildings and foliage. While the
performance in a building is improved by moving closer to windows, glass with certain sun shielding
films may block satellite signals.
• Position your radio to enhance reception — Signals from GNSS satellites are transmitted to your
GNSS antenna, which is in your radio antenna. Hold your radio away from your body, giving the
antenna clear access to satellite signals. Do not cover the antenna area with your fingers or
anything else.
• Stand still — If possible, stand still until your radio is finished determining your location. Moving your
radio at a walking pace while your radio is calculating your approximate location may substantially
decrease GNSS performance.
This feature works best where there is nothing between your radio and a large amount of open sky. To
maximize the ability of your radio to determine a location fix, avoid closed space, tall buildings, and
foliage. If possible, do not use GNSS in underground parking lots, tunnels, under bridges, and close to
high buildings.
4.2
Enabling GNSS
Procedure:
1 From the home screen, press the
MENU
key.
2 Select Location → Interface .
3 Select On .
NOTICE: Your service provider can enable this feature.
4.3
GNSS Icon
When GNSSis enabled, the following icon is displayed in the status icon area: Depending on the
current GPS/GNSS state, the icon can be solid – GPS/GNSS has a fix, or blinking – GPS/GNSS is
searching for a fix. The blinking GPS/GNSS icon can be disabled/enabled by your service provider.
MN002041A01–AA
Chapter 4: Global Navigation Satellite System (GNSS) Location Service
78 Send Feedback