Motorola MT2070, Руководство пользователя

Страница: 415 / 606

Advanced Data Formatting 14 - 5
Note that using the standard data editing functions also creates ADF rules. Scan options are entered as ADF rules,
and the hierarchy mentioned above also applies to them. For the device, this applies to prefix/suffix programming
in the parameter
Scan Data Transmission Format on page 5-24 .
These rules reside in the same “rule list” as ADF Rules, so the order you create them is also important.
Default Rules
Every unit has a default rule to send all scan data. Units with custom software may have one or more default rules
burned in. The rules hierarchy checks user programmable rules first, then the default rules. Disable default rules by
entering the following general rule in the user programmable buffer:
When receiving scan data, send all data.
Since this rule always applies, ADF never applies the default rules.
ADF Bar Codes
Table 14-1 lists the bar codes available through ADF.
Table 14-1
ADF Bar Codes
Parameter Page Number
Special Commands 14-8
Pause Duration 14-8
Begin New Rule 14-8
Save Rule 14-9
Erase 14-9
Quit Entering Rules 14-9
Disable Rule Set 14-10
Criteria 14-11
Code Types 14-11
Code Lengths 14-18
1 Character - 6 Characters 14-18
7 Characters - 13 Characters 14-19
14 Characters - 20 Characters 14-20
21 Characters - 27 Characters 14-21
28 Characters - 30 Characters 14-22
Specific String at Start 14-22
Specific String, Any Location 14-23
Any Message OK 14-23