manualshive.com logo in svg

Motorola MOTORAZR maxx V6, Руководство по обслуживанию

Поделиться
Скачать
Motorola MOTORAZR maxx V6 Скачать руководство пользователя страница 28

24

 

 October 26, 2006

Disassembly

 6809505A64-O

Removing and Replacing the Keypad Assembly

 

1.

Remove the battery cover, battery, SIM, rear housing, antenna, transceiver board assembly, 
flip assembly cover, and camera assembly, as described in the procedures. 

2.

Disassemble the keypad from the transceiver front housing by removing the two bottom 
tabs from the slots in the housing.  Rotate the keypad in place such that the remaining 6 
tabs are removed from the remaining slots. 

3.

To replace, assemble the keypad into the transceiver front housing by aligning the two 
bottom tabs to the slots in the housing.  Rotate the keypad in place such that the remaining 
6 tabs are inserted into the remaining slots.  

4.

Ensure the 6 tabs are fully inserted into the transceiver housing.

5.

With the flip open, place the assembly in the press fixture with the keypad/flip facing down.  
Operate the press. The keypads flex tail and connector should be folded away from the 
front housing.

G

The flexible printed cable (FPC) (flex) is easily damaged. Exercise extreme care when 
handling.

061430o

Figure 14.  Removing and Replacing the Keypad Assembly

061430o

Figure 15.  Removing and Replacing the Keypad Assembly

Содержание MOTORAZR maxx V6



















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды