manualshive.com logo in svg

Motorola MOTORAZR maxx V6, Руководство по обслуживанию

Поделиться
Скачать
Motorola MOTORAZR maxx V6 Скачать руководство пользователя страница 21

 October 26, 2006 

17

Level 1 and 2 Service Manual

Disassembly

Removing and Replacing the Transceiver Board Assembly

 

1.

Remove the battery cover, battery, SIM, and rear housing as described in the procedures

.

2.

Carefully work the flat end of the disassembly tool under the flex connector and remove 
the connector from the transceiver board.

3.

Lift the transceiver board assembly from the front housing. See Figure 7. 

4.

To replace, insert the acoustic module on to the transceiver board assembly. 

5.

Then the flex connector should be mated with the PCB still held in hand.

6.

The PCB should then be rotated into position into the front housing.

7.

Replace the rear housing, SIM, battery, and battery cover as described in the procedures.

G

This product contains static-sensitive devices. Use anti-static handling procedures 
to prevent electrostatic discharge (ESD) and component damage.

G

The flexible printed cable (FPC) (flex) is easily damaged. Exercise extreme care when 
handling.

040710o

Figure 7.  Removing the Rear Housing Assembly

➧

Be sure the volume/smart buttons and voice button are correctly positioned in 
relation to the corresponding switches on the transceiver board. Verify operation of 
the buttons after replacing the transceiver board and rear chassis assembly.

Содержание MOTORAZR maxx V6



















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды