Motorola MK1200, Руководство по продукции

Страница: 81 / 232

Remote Device Manager 4 - 9
Filtering Parameters
Use the
Filter Parameters
fields on the
RDM
main screen to display only certain devices on the network. Table 4-5
describes these fields.
Set the filtering parameters and click Apply Filter to apply the filters in RDM.
Click Clear Filter to remove the filtering parameters.
Table 4-5
Filter Parameters Fields
Menu Item Function
Product Group Select a product group to display.
Product Select product model to display. See Identification on page 3-11 .
Config Group 1 Select an assigned configuration group to display. To set configuration groups, use the
System Configuration feature of RDM or System Menu. See
Identification on page
3-11 .
Config Group 2 Select a second assigned configuration group to display. To set configuration groups,
use the System Configuration feature of RDM or System Menu. See
Identification on
page 3-11 .
Location Select a device location to display. To set locations, use the System Configuration
feature of RDM or System Menu. See
Identification on page 3-11 .
Address Types Select Static to display devices found in Manage Static IP Address list (see Managing
Static IP Addresses on page 4-20 ), or Discovered to display all devices not in the
Manage Static IP Address list (see Enabling DHCP on page 4-24 ).
IP Address Enter IP address range to filter devices within the range.