Motorola MK1200, Руководство по продукции

Страница: 92 / 232

4 - 20 MK1200 MicroKiosk for CE .NET 4.2 Product Reference Guide
Setting a Static IP Address
To set a static IP address for a wired device:
1.
In the
MK1200 Configuration Utility
window, select
IP Address
under the appropriate adapter: Onboard Wired
Ethernet.
Figure 4-13 Setting a Static IP Address
2.
In the text box, enter the IP address.
3.
Also select and define the adapter's
Default Gateway
and
Subnet Mask
.
4.
Optionally, select and define the
DNS Server(s)
and
DNS Domain
.
5.
Ensure that
Enable DHCP
is disabled (de-select its check box).
6.
Save the changes.
Managing Static IP Addresses
Specify the static IP address of an MK1200, which is on a different subnet than the Symbol Remote Device
Manager PC, to establish a connection and still be managed by the RDM. This causes the RDM to list the devices
and their IP addresses, without performing discovery, in the
RDM
main screen.
For this to occur, the MK1200 that is on a different subnet than the RDM must have a static (unchanging) IP
address during the remote management session.
This is useful when MK1200s are on more than one subnet, when bandwidth is a consideration, or when MK1200s
are connected over a WAN. For example, if the MK1200 RF and wired Ethernet devices are on different subnets,
the Remote Device Manager can still manage all devices.