Motorola MINITOR VI RLN6505 Series, Руководство пользователя

Страница: 5 / 48

3
En
gl
is
h
3
3
English
• Maximum ambient temperature around the power supply equipment must not exceed 40 °C
(104 °F).
• Output power from the power supply unit must not exceed the ratings stated on the product label
located on the bottom of the charger.
• Make sure the cord is located where it will not be stepped on, tripped over, or subjected to water,
damage, or stress.
BRIEF DESCRIPTION
The Standard Charger is intended for use with the Motorola Solutions-approved Lithium-ion
rechargeable batteries (listed in Table 1). The front pocket of the charger is capable of handling a
pager with an attached battery. The rear pocket is designed only to charge the above mentioned
batteries (alone).
An illuminated LED indicates the state of charge for the front and rear pocket.
OPERATIONAL GUIDELINES
• Always remember to power the Standard Charger first before inserting the pager with the attached
battery into the front pocket or the auxiliary battery into the charger's rear pocket.
• The front pocket has charging priority over the rear pocket. Therefore, the rear pocket may not
charge at its full rate until the front pocket charging is complete.
• The Standard Charger is not designed to accommodate the alkaline battery tray.
68012010009_ba.book Page 3 Wednesday, July 19, 2017 4:57 PM