manualshive.com logo in svg

Motorola MILESTONE 3, Руководство пользователя, Страница: 62 / 222

Поделиться
Скачать
Motorola MILESTONE 3 Скачать руководство пользователя страница 62

Intelligent Lighting Indicators

This feature temporarily changes the color of the Top Lightbar and adds a color bar to the main display screen to help
signal that a radio event has occurred.

NOTE:
This feature must be preprogrammed by a qualified radio technician.

Backlight and Bar
Color

Notification

When

Orange

Emergency Alerts

The radio initiates an emergency alarm or call.

The radio receives an emergency alarm or call.

The radio initiates the Man Down Post-Alert timer.

The radio initiates Fireground Evacuation alarm.

Red

Critical Alerts

The radio battery is low.

The radio is out of range.

The radio enters Failsoft mode.

The radio is unable to establish a full connection with the system.

The radio is unable to authenticate or register with the system.

The radio lost GPS signal or GPS function fails.

Table continued…

English

62

  

Send Feedback

Draft

Содержание MILESTONE 3































































































































































































































Отзывы:

Нет отзывов