Motorola MILESTONE 3 Скачать руководство пользователя страница 17

Страница: 17 / 222

Notice to Users (FCC and
Industry Canada)

This device complies with Part 15 of the FCC rules and
Industry Canada's license-exempt RSS's per the following
conditions:

•

This device may not cause harmful interference.

•

This device must accept any interference received,
including interference that may cause undesired
operation.

•

Changes or modifications made to this device, not
expressly approved by Motorola, could void the
authority of the user to operate this equipment.

Software Version

All the features described in the following sections are
supported by the software version R15.00.00 or later.

See

Accessing the Radio Information on page 196

determine the software version of your radio.

Check with your dealer or system administrator for more
details of all the features supported.

English

Send Feedback

Draft

Содержание MILESTONE 3






























































































































































































































Результаты поиска

Содержание MILESTONE 3

Отзывы:

Motorola MILESTONE 3, Руководство пользователя, Страница: 17 / 222

Результаты поиска

Содержание MILESTONE 3

Отзывы: