7
Im
p
o
rt
an
t
S
af
et
y
In
st
ru
ct
io
n
s
8
In
st
al
la
ti
o
n
Package Contents
Please check the contents of the package carefully
. If som ething is m issing or has
become damaged in transit, you should NOT use the telephone. In such a case you
should return to the dealer with your sales receipt or contact the Motorola's distributor
directly. (For details, please refer to the Warranty section.)
Setting up the Base Station and Charger Unit
Place the base station and charger unit in an easily accessible location. Make sure
that the location is stable and flat and that the surface is non-slip. When choosing
the location, also make sure that all cables can be routed so as to prevent people
tripping over them. Furthermore, avoid placing the base station and charger unit in
the immediate vicinity of other electronic appliances such as microwaves, PCs or Hi-
Fi's, for example.
Base Station
Mobile Handset
Mains Adaptor
Telephone Line Cord
Rechargeable Batteries
type micro AAA
Charger Unit
User's Guide
ME4050-1
Single Pack
1
1
1
1
2
0
1
ME4050-2
Twin Pack
1
2
2
1
4
1
1
ME4050 -3
Triple Pack
1
3
3
1
6
2
1
ME4050-4
Quad Pack
1
4
4
1
8
3
1
Note: Retain the packaging of your appliance to prevent it from being damaged should
you ever need to return it.
Use only the power supply that came with this unit. Using other power supplies
may damage the unit.
Because cordless phones operate on electricity, you should have at least one phone
in your home that isn't cordless, in case the power in your home goes out.
To avoid interference to nearby appliances, do not place the base of the cordless
phone on or near a TV, microwave oven, or VCR.
It is impossible to make emergency calls when the keypad lock is enabled.
8.
9.
10.
11.
These Operating Instructions are issued for information purposes. Their content is
not the subject of a contract.
All indicated data is merely nominal values. The described equipment and options
may differ depending on requirements which are specific to each country
Technical Amendments
This device is dedicated to be used in the analog public switched telecommunication
network (PSTN).
12. This telephone complies with applicable safety requirements for exposure to radio
waves (EMR). The mean power of this telephone does not exceed 20mW limit at
which point testing is required.
13. The earpiece of the handset may attract small metal objects such as staples and
pins. Care should be taken when placing the handset near these items.
14. Do not use the handset in an explosive hazard area such as where there is gas
leaking.
15. This telephone is not designed for making emergency telephone calls when the
mains power fails. Always have a corded phone available to be able to make and
receive calls to emergency services if the mains power fails.