Motorola MC7090CN, Руководство пользователя

Страница: 82 / 130

4 - 6 MC7090CN User Guide
Charging Temperature
Charge batteries in temperatures from 0
o
C to 40
o
C (32°F to 104°F). Note that at temperatures above 35
o
C,
charging is intelligently controlled by the EDA and the charging accessory in order to ensure safe operation
and optimize long-term battery life.
To accomplish this, for small periods of time, the EDA or accessory alternately enables and disables battery
charging to keep the battery at acceptable temperatures. The EDA or accessory indicates when charging is
disabled due to abnormal temperatures via its LED. See
Table 1-2 on page 1-7 .
VCD7000 Vehicle Cradle
This section describes how to use a VCD7000 vehicle cradle with the EDA. For cradle installation and
communication setup procedures refer to the
MC7090CN Integrator Guide .
Once installed in a vehicle, the cradle:
•
holds the EDA securely in place
•
provides power for operating the EDA
•
provides a serial port for data communication between an EDA and an external device (e.g., a printer)
•
re-charges the battery in the EDA
•
re-charges a standard capacity or extended capacity spare battery.
Charging the EDA Battery
Insert the EDA into the vehicle cradle to begin charging. A click indicates that the EDA button release locking
mechanism is enabled and the EDA is locked in place.
Figure 4-5
EDA Battery Charging
CAUTION
Ensure the EDA is fully inserted in the cradle. Lack of proper insertion may result in
property damage or personal injury. Zebra is not responsible for any loss resulting from the use of
the products while driving.
Release Lever