1
2
3
MC55
1
2
2
1
6
11
5
8
1
2
3
7
9
10
12
7
3
4
3
1
2
3
4
3
2
5
1
2
3
4
3
5
7
2
6
8
8
6
10
9
10
9
18
17
13
19
14
15
21
16
20
22
23
1
3
4
3
5
9
2
2
2
10
2
Create a Partnership
Install ActiveSync
®
Communicate with Host
1
Scan/Action Button
2
Up/Down Button
3
Microphone
4
Power Button
5
I/O Connector
6
Keypad
7
Scan/Action Button
8
Touch Screen
(with screen protector)
9
Scan/Decode LED
10
Charging/Battery
Status LED
11
Radio Status LED
12
Phone Speaker
13
Handstrap
14
Battery
15
Battery Latch
16
Camera Flash (optional)
17
Camera (optional)
18
Exit Window
(see Data Capture Options)
19
Tether
20
Scan/Action Button
21
Action Button
22
Stylus
23
Speaker
1
Talk
2
Navigation
3
Soft Key
4
Scan/Action Button
5
End
6
Orange Key
7
Backlight
8
Blue Key
9
OK
10
Start Menu
Note 1:
To reset the MC55, press and hold the Power button for five (5) seconds.
FE
AT
UR
ES
PH
ON
E
SE
TU
P
CO
M
M
UN
IC
AT
IO
N
GE
TT
IN
G
ST
AR
TE
D
- B
AT
TE
RY
IN
ST
AL
LA
TI
ON
Numeric Keypad
Alpha-Numeric Keypad
PIM Keypad
CH
AR
GI
N
G
SIM Card Installation (MC5574 only)
Quick Start Guide
Download ActiveSync
®
4.5 or higher from http://www.microsoft.com
and follow the instructions to install ActiveSync onto the host computer.
Follow the on-screen ActiveSync instructions to establish
a connection between the MC55 and the host computer.
Blue Key
Use this key to access function keys shown on the keypad
in blue.
>
Orange Key
Use this key to access the secondary layer of characters
and actions.
>
>
>
>
>
Press the Blue key once to activate this state temporarily,
followed by another key.
Press the Blue key twice to lock this state.
Press the Blue key a third time to unlock.
Press the Orange key once to activate this state
temporarily, followed by another key.
Press the Orange key twice to lock this state.
Press the Orange key a third time to unlock.
Notifications
Charging/Battery Status LED:
Scan/Decode LED:
Slow blinking amber: Battery charging
Solid amber: Fully charged
Fast blinking amber: Charging error
Red: Scanning active
Green: Good Decode
Scan/Decode
Charging/Battery Status
Radio Status
Radio Status LED:
Green: RF active
Insert the Battery
Remove the Battery
1.
Insert the battery, bottom first, into the battery compartment.
2.
Press down on the battery until
the battery latch snaps into
place.
3.
Replace the
handstrap.
1.
Press the Power button.
2.
Remove handstrap.
3.
Slide battery latch to the right.
The battery ejects slightly.
4.
Grasp the battery and lift from
the MC55.
Charge the MC55
Charge the Battery
Slow Blinking Amber = Charging
Charging/Battery Status LED
Solid Amber = Fully charged
Fast Blinking Amber = Charging error
Note:
The 2400 mAh battery charges in less than four hours and the 3600 mAh battery charges in less
than six hours.
Use the Four-slot Battery Charger
to charge batteries separately.
1.
Remove battery pack.
2
.
Lift rubber access door.
3
.
Slide SIM card holder up to unlock.
4.
Lift card holder.
5.
Insert SIM card into SIM holder.
NOTE :
The proper position of the SIM card—the card connector (i.e.,
gold area) should be facing outward with the bevelled corner
facing away.
6.
Lower the SIM card holder down.
7.
Slide SIM card holder down to lock into place.
8.
Close rubber access door.
9.
Reinstall battery pack.
Enter Your PIN
After installing the SIM card activate your mobile service
connection. In most cases, SIM cards are preset with a PIN
(Personal Identity Number), provided by your service provider.
1.
Press the Power button to turn on the MC55.
2.
Tap
Start
>
Phone
.
3.
Enter the PIN from your service provider.
4.
Tap
Enter
.
Turn On the Phone Function
1.
Launch the
Wireless Manager
application.
•
On the
Today
screen, tap the
Wireless Manager
icon.
or
•
On the
Today
screen, tap the signal icon and select
Wireless Manager
.
2.
On the
Wireless Manager
screen, tap
Phone
to turn on the
phone function. The signal icon (wireless off) changes to (not connected) and then to (searching)
indicating the MC55 is searching for a mobile connection. This may take a few seconds. The signal icon
then changes to once a good mobile connection is established.
Turn Off the Phone Function
1.
Launch the
Wireless Manager
application.
•
On the
Today
screen, tap the
Wireless Manager
icon.
or
•
On the
Today
screen, tap the signal icon and select
Wireless Manager
.
2.
On the
Wireless Manager
screen, tap
Phone
to turn off phone function.
Note:
Remove protective shipping film that covers the touch screen, exit window and camera window
before using.
Press the Orange key once to lock the keypad into Alpha
state.
Press the Orange key a second time to return to the normal
state.
Press the Blue key once to activate this state, followed by
another key.
Blue Key
Use this key to access function keys shown on the keypad
in blue.
>
Orange Key
Use this key to access the secondary layer of characters.
>
>
4
(Note 1)
Use the Single-slot cradles (USB or
Ethernet/Modem/USB),
Four-slot cradles (Charge Only
or Ethernet) or cables to charge the
battery in the MC55.
You can also charge a spare battery
using the Single-slot cradle.
