Motorola MC70 - Enterprise Digital Assistant, Руководство по интеграции

Страница: 143 / 208

Wireless Applications 7 - 19
Figure 7-28
Transmit Power Dialog Box (Ad-Hoc Mode)
Tap
Next
to display the
Battery Usage
dialog box.
Battery Usage
Use the
Battery Usage
dialog box to select power consumption of the wireless LAN. There are three settings
available: CAM, Fast Power Save, and MAX Power Save. Battery usage cannot be configured in Ad-Hoc
profiles.
Table 7-15
Transmit Power Dialog Box (Infrastructure Mode)
Field Description
Automatic Select
Automatic
(the default) to use the AP power level.
Power Plus Select
Power Plus
to set the EDA transmission power one level higher than the level
set for the AP.
Table 7-16
Power Transmit Options (Ad-Hoc Mode)
Field Description
Full Select
Full
power for the highest transmission power level. Select
Full
power when
operating in highly reflective environments and areas where other devices could be
operating nearby, or when attempting to communicate with devices at the outer edge of a
coverage area.
30 mW Select
30 mW
to set the transmit power level to 30 mW.
15 mW Select
15 mW
to set the transmit power level to 15 mW.
5 mW Select
5 mW
to set the transmit power level to 5 mW.
1 mW Select
1 mW
for the lowest transmission power level. Use this level when communicating
with other devices in very close proximity, or in instances where you expect little or no radio
interference from other devices.