Motorola M68EML08GZ16, Руководство пользователя

Страница: 10 / 38

M68EML08GZ16 Emulation Module - Version 4.0 User’s Manual
10 M68EML08GZ16 Quick Start Guide MOTOROLA
M68EML08GZ16 Quick Start Guide
• Insert the M68EML08GZ16 through the access-panel opening.
• Fit together M68EML08GZ16 connectors P1 and P2 (on the bottom of
the board) to connectors P11 and P12, respectively, of the MMDS or
MMEVS (P6 and P7 on some MMEVS boards) control board and snap
the corners of the M68EML08GZ16 onto the plastic standoffs.
3 - Connect the emulation module to your target system
Use the supplied target flex cable, appropriate target head adapter, and surface
mount adapter. Plug the appropriate end of the flex cable plugs into
M68EML08GZ16 connectors J2 and J3.
• If the M68EML08GZ16 is in an MMDS station module, run the flex
cable through the slit in the station-module enclosure, then replace the
access panel.
• Plug the other end of the flex cable into the target head. Solder the
appropriate surface mount adapter to your target if necessary. Then plug
the target head into the surface mount adapter on your target system.
4 - Install the development software